Plasma TV Reviews Blog

Posts Tagged ‘Few Minutes’

Premier Mounts AM2 B Articulating Wall Mount for 17 to 40 Displays Black

Recommended for 10″-37″ LCD displays, this full-articulation swingout arm can be pulled out 17″ from the wall. It also offers significant tilt and pivot using innovative Radial Glide Technology.

User Ratings and Reviews

5 Stars JCC
THIS IS MY SECOND PURCHASE. THIS MOUNT FAR EXCCEDED MY EXPECTATIONS. GIVES ALOT OF FLEXIBLITY FOR REVIEWING ANGLES, ETC. I WOULD STRONGLY RECOMMEND.

4 Stars Great Mount
Just got this mount a few weeks ago. Went up real easy. Put my 32″ Samsung TV on a thick plaster wall using three 1/4″ toggle bolts. Holds great and arm easily moves. Would not suggest this mounting method with any drywall. Looks good too in my smaller bedroom on the opposite wall and above the bed/near the ceiling.

Only change I would make is for the manufacturer to supply a template that shows the oval cover outline and holes where to drill so I could precisely postion the TV. Made my own but having a pre-made one would have saved a few minutes.

You need the optional plate for a the 32″ Samsung.

5 Stars Third Time’s the Charm…
We tried two other mounts before getting the Premier. The first was misrepresented in the Amazon description and was not even compatible with our 22″ bedroom flatscreen. The second fit but it extended above the back of the set and was visible. Ugly!

The AM2-B is terrific, easy to install, solid, and offers great flexibility.

4 Stars Pretty Pleased
First: I am a pretty good handy person who has experiencing installing items like this in the house. I have installed tilting and arm type supports on four occasions prior. This was my fifth.

My Installation: Install a 26″ LCD above a door frame in a bathroom. Pretty straight forward.

Pro’s: I had it installed in about 20 minutes total. It was quite easy, and seemed very stable. The leveling is quite easy as you have only one alignment (vertical) to consider. The swing cjharacteristics on side to side and in or out are quite impressive. I can go nearly 90deg to each side when fully extended out.

Cons: you better have a stud where you want the center of your TV or you will have to build a “support” between studs. (No big issue for those who know what to do). Bigger issue is that the stud bolts are Phillips Head Screws.. So you better pre-drill your holes, and better have a power screw driver. No way can you sink these monsters by hand and no pre-drill with out rounding off the head. These would have been better as hex-heads. The down ward tint is a bit less than I thought, but I have a high mount. If middle of wall mount, this is no big issue. The cable management system is adequate.

I would recommend this and use this mount again.

5 Stars compact and easy to install
Love this item. A lot smaller than other types of mount, but does the job.

Installation was a snap, 4 screws into a stud. Do not miss the studs!

Movement is smooth and easy in all directions. Would buy another if needed.

Buy/More Info

Peerless ST632P Tilt Wall Mount for 10 to 37 Displays Black

Perfect for digital signage, point-of-sale stations or office applications, the SmartMount Universal Tilt Wall Mounts come with everything you need for a quick and easy install: LCD screens engage with an audible click, a VESA compatible adapter plate and a pre-assembled wall unit that can be mounted to a single wood stud or concrete. Plus, the Peerless fastener pack includes all screen attachment hardware, which means no guesswork and no trips to the hardware store.

User Ratings and Reviews

5 Stars Very satisfied – easy installation
The product was easy to install and works great per the other reviews. The hardest part was getting the TV onto the wall-mount but with the help of somebody else it only took a few minutes.

5 Stars Nice mount would buy again
This is a nice mount. It did work well, and is sturdy. The kit is complete and the instructions good. I used it to mount a 32″ tv and it worked well. You do have to check the mount pattern on your TV, but it will work with the sizes claimed. The tv is close to the wall, so cabling may be difficult. Tilt works fine. It is a bit difficult to hook the tv to the mount during assembly and for larger sets you may need someone to watch as you line things up, but once hooked it is secure.ONE THING I WOULD SUGGEST I used the adapter plate, which is needed for 200 X 100, and 200 x 200. If you need this plate buy an extra set of washers. The kit comes with 4 washers you need to use to attach the adapter to the hanger plate. I felt it was a good idea to use 4 additional washers when mounting the TV to the plate for additional surface area for the screw to grab. I would buy again.

4 Stars Good wall mount, great value
I’ve been using this wall mount for about 8 months now, and it’s been great. The tilt really helps reduce the color distortion that some LCD TVs have when viewed from an angle. I’m giving it a 4 out of 5 for two reasons. First, getting the TV pannel onto the wall mount is a little tricky if you’re doing this as a one-person job. It’s definitely doable, but takes some patience when you’re working with a larger TV/Monitor. Second, my TV has the inputs on the bottom/back, and when the TV is tilted the inputs cannot be reached. Of course, if your TV has side or top inputs, this probably won’t be an issue. But I would like to have seen a little more clearance between the wall and TV.

5 Stars Great wall mount
This mount comes with everything you need. It is easy to install. The only drawback is no swivel. I didn’t need swivel so this was the mount for me.

4 Stars Decent Product
I have a 22 inch TV mounted on it and it works great. The only reason why I don’t give it a 5 is because the TV is not completely level. However, I’m not positive that I am not the reason for the out of level installation. But since this is for a workout TV we use in the garagae and it’s not that out of level, I haven’t put too much effort into reinstalling it.

Buy/More Info

Black Precision Gear Projector Mount PRG UNV

Peerless’ PRG Precision Gear Projector Mount is simplifying the way image alignment is done. The patent-pending precision gear design allows exact tilt and roll image positioning by either simply turning two adjustment knobs with a Phillips screw driver, or use the tool-less option by extending the knobs to adjust by hand. Just set the precision gear to the desired position to secure it in place – it will hold its position even during projector maintenance. With Peerless’ PRG Precision Gear Projector Mount, just set it and forget it. No more adjustment screws. No more micro adjustments. No more hassles.

Product Features

• Weight capacity: 50 lbs.
• Black mount with universal spider adapter
• Precision gear reduces installation time and makes mount easier to align by simply turning adjustment knods

Technical Details

• Brand Name: Peerless
• Model: PRG-UNV
• Device Type: Mounting component
• Style Name: Tilt & Swivel
• Specific Uses For Product: Projector
• Material Type: Aluminum alloy
• Weight: 2.9 pounds
• Item Package Quantity: 1

User Ratings and Reviews

5 Stars Outstanding mount
I had to replace my JVC SX21 for a new JVC DLA-RS10 and my old custom mount would not fit my new projector. When I had installed the original projector I had planed it to the max. Had out the trig formulas and it was a perfect set up.

Problem was that the mount that I had – although expensive and infinitely adjustable would never hold the projector tight. Believe me I tried. There was always a bit of creep every month or two.

Installed this mount in a few minutes, adjusted the knobs and tightened the mount in place. Perfection! No movement, people can jump on the floor above and this thing is rock solid. Set it and forget it. My only complaint is that it took this long for someone to think of this.

If you have done your research and plan on installing your projector yourself as I did know that it uses industry standard 2 1/2″ pipe to drop down from the ceiling. it could not be easier. Screw in the top part. install the base to the projector and it slides into place. Lock it and adjust. Just brilliant!

Highly recommended!

5 Stars Superior Projector Mount
As an A/V installer I’ve used several different makes and models of projector mounts; but none has the flexibility of this precision geared mount.

3 Stars Good product – not enough information
I like the product but the initial information did not give enough detail concerning installation.

If I had not mounted projectors before, I could have been easily frustrated because

it did not detail initially that an additional base would be needed to install.

5 Stars Get this mount!
If you have a large projector like the Panasonic PT-AE3000U, this is the ceiling mount for you. I had my projector mounted in less than an hour. Instructions are straight-forward and easy to follow. If you are investing 2500.00 in a projector as I did, don’t skimp on the mount.

5 Stars super
Great product. Unlike the disastrous PRS-UNV, whose adjustment screws never got tight enough to hold the PJ in one place, this mount is bomb-proof. The geared mechanisms that control pitch and roll are high-quality and stay put.

Buy/More Info