Plasma TV Reviews Blog

Posts Tagged ‘Omnimount’

OmniMount CL MP Articulating Wall Mount for 23 to 37 Displays Silver

Cantilever arm allows extension and 180 degrees lateral rotation for viewing from multiple locaton. Allows tilt and swivel of flat panel for optimum viewing angle. Provides optimum viewing angles Portrait or landscape position viewing Low profile design – folds flat against wall Integrated cable management Lift & Lock mounting for easy installation Die cast aluminum construction Up to 80 pounds (36.3 kg) max weight capacity

User Ratings and Reviews

5 Stars Great product
Very Solid. Easy to install on 1 stud. I really like how far the arm can extend from the wall.

5 Stars Flat Panel Wall Mount
This is a really steady, well-built product. The directions are clear. The supplied wall anchors are probably a bit too lightweight for the heavy combination of mount and TV and we replaced them with a heavier-duty anchor set. I strongly recommend this product.

5 Stars Looks good
It looks good and is a sturdy little thing for my 32″ Samsung Flat Screen LCD. The material that it is made of suprised me in that it was really heavy. It is a bit bigger than I expected but looks good with the TV on it. I really like the fact that the TV can be adjusted for what is best for me.

5 Stars AWESOME MOUNT
We got this mount about a month ago but just got it installed. We searched every mount out there and this is by far the best. If you want a really sturdy mount, this Omnimount CLM is the one. You will not be disappointed. Highly recommended!!!!

5 Stars Omnimount
Serious heavy duty wall mount. Bought two of the same (one for a 32 inch sharp and one for 26 inch sharp) Admittedly, maybe a bit of overkill for the 26 but don’t have any regrets as I like things secure. One thing to consider on smaller tvs is the back panel and whether it has any removeable panels. My sharps have removeable panels that cover all the componet plugs and the plate of the wallmount covers part of the panels of the 26 inch. Occasionally need to get to those component plugs. I used spacers for the 26″ tv so plate is not fully attached to the back of the TV but still pretty secure with the 4 screws. In the case of the Sharps, they look much better with the back panels on. I guess I could have decided not to use the panels on the 26″. The only issue I have is that you need to use some serious muscle to move the arms. There is an adjustment to loosen but doesn’t seem to make much of difference. My 110 lbs wife really needs to plant her feet to move. Otherwise great construction and very secure.

Buy/More Info

OmniMount U1 TILT P Tilt Wall Mount for 13 to 32 Displays Black

OmniMount’s U1T universal tilt mount is designed for flat panel televisions from 13″ to 22″ weighing up to 40 lbs. It features OmniMount’s exclusive installation template and Lift n’ Lock mounting system for the easiest and most universal installation in the industry.

Buy/More Info

OmniMount ULPT LA Tilt Low Profile Wall Mount for 40 to 63 Displays Black

Tilting Design / Fits 42″ to 63″ Screen (diagonal) televisions / Locking System / Color – Anthracite Easy installation Fits 42 to 63 Flat panel TV Holds up to 200 lb. (90.7kg) maximum weight Double stud mounting Profile from wall – 6.2

User Ratings and Reviews

5 Stars Omniview Low Profile Wall Mount
This is an excellent wall mount. Well designed and well made. Comes with everything needed to create a professional installation. The instructions could be improved, but if you are mechanically inclined, you should have no problem. Best mount out there. Sixth Ave had a great price and free shipping. 5 Stars!

5 Stars Engineering and all was great!
I was thoroughly satisfied with this. It assembled easily, you could tell the parts were quality made, and it was actually a bit more complex of a mechanism than I thought it would be. The template was great.. and the instructions were pretty good. The only thing on the instructions was that when it says to put down the kick stands to install the cables…. there are little locking fingers on the bottom rail that may have been locked when you first put the TV on the top rail. so, you have to be aware of that to use the kick stands. Other than that… I’m very satisfied!

4 Stars Good quality, but be sure to plan installation well.
They aren’t kidding around when they say low profile. It does provide a nice, finished look, but it does make installation more difficult. My tv (Sony 46″ XBR LCD) has the inputs perpendicular to the wall and my original HDMI cables were a bit stiff to make the 90 degree turn. My inputs (power and video) from the wall are inside the rectangular frame, which meant that I had to run cables up and then down to access the tv inputs. You can’t fit cable across due to the low profile. I had to buy a recessed outlet for the power as well. Not a defect with the product, just the nature of having such a low profile mount.

A couple other quibbles:

- My tv VESA mounts only allow for 1 mounting location for the hangers. This basically means that you can’t adjust the height once you put the rectangular bracket on the wall. Just another example of why you should plan ahead, ensure that you have the height correct when installing the lag bolts. This may just be a limitation of my TV.

- The bolts used to attached the tv to the hangers are not easily accessed due to the design of the hangers. (Had to buy a flexible link for screwing in the bolts. Again, it may just be due to the design of my TV, but it could apply to yours as well.

Buy/More Info

OmniMount 4N1 M B WorldMount Articulating Wall Mount for 23 to 37 Displays Black

The WorldMount Series 4N1-M cantilevel mount from OminiMount offers maneuverability, adaptibility, and a stylish look that is sure to complement your flat panel TV. Smooth and easy tilt, pan, and swivel adjustments provide the right viewing position every time.

User Ratings and Reviews

4 Stars Solid mount / hard to center
Overall this is a great quality mount. I have installed articulating arms before on everything from a 22″ to a 50″ flat panel. The arms are hard to keep level as you move the TV around. They usually sag a bit and look just a bit off level. Now that I have found Omnimount, I will try to use it from now on. I am pretty good at figuring out installs like this, but the directions were pretty good for the less than engineerish person. There are plenty of pictures and diagrams. I recently mounted a 32″ flat in a bedroom. I am always weary of mounting expensive or heavy things using any kind of drywall anchor. This one I tried to pick the best stud that would put the TV closest to center of the wall. Swinging it to both sides to see which was better, I had to settle on a few inches off center. The problem is the wall mount part uses one vertical member to bolt to the wall. Other flat mounts (tilts up and down only) span studs with 2 to 4 anchor points. You can usually catch a stud on one or both sides, then the carriage (part the TV mounts to) can slide on that wall mounted portion. This lets you center the TV perfectly.

If you can have faith in a hollow wall anchor, or even better, have the luck to have solid material like plywood built behind your wall, and you can mount the vertical member perfectly, this is the best mount I’ve seen.

5 Stars Absolutely Perfect
Bought this Item … It came very quickly by FedEx it only took me about an hour to set up…………. its very functional and I would recommend this to anyone who like to do things themselves its very easy to set up

Buy/More Info

OmniMount POWER40 Articulating Motorized Wall Mount for 23 to 40 Displays Black

The Power40 is a state-of-the-art remote-controlled motorized mount that allows you to tilt, pan and swivel medium-sized flat panels with the touch of a button. The Power40 comes with a programmable remote control so you can reposition the mount from anywhere in the room. 0 to +15-degrees Tilt 0 to 20-degrees left and right pan 2.7 (69mm) mounting profile 7.4 (189mm) maximum usable extension 100×100, 100×200, 200×200, 200×300, 200×400, 300×300, 300×400, and 400×400 VESA Compliant

Buy/More Info